Meizu M3S Mã Bảo Vệ | Meizu M3S Tài Khoản Flyme

Meizu M3S Mã Bảo Vệ | Meizu M3S Tài Khoản Flyme

Meizu M3S Khóa Mã Bảo Vệ Và tài Khoản Flyme,Mở Khóa Thành Công
Meizu M3S Remove Lock Screen | Flyme Account By MRT

Nhận Xóa Mã Bảo Vệ Meizu M3S Online
Nhận Xóa Flyme Account Meizu M3S Online
Nhận Unbrick Meizu M3S Online

Tags:Meizu M3S Tiếng Việt,Meizu M3S Lock Screen,Meizu M3S mã Bảo vệ,Meizu M3S Password,Meizu M3S Flyme Account,Meizu M3S FRP,

☯ Unlock - Remove FRP - Repair IMEI - Online (Teamviewer)
☎ Hotline : 0966833711 (Zalo + Facebook)

۩۩ Website : www.thanhnamPDAviet.net
@thanhnamPDAviet

    Disconnect Mobile...
    Re-Put the Mobile Bettery...
    Then Connect your Phone to Computer again....
    Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
    Get Mobile Port is:  COM21
>>> Device driver identification: 
    MediaTek USB Port
>>> Mobile Has Connect...
    CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
    HW_Inf:  8A00    SW_Inf:  CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
    Mobile phone status:SYNC...
    Mobile phone status swtich to :brom...Success
Success
    Make sure Mobile status has in :brom...
    Init Mobile BOOT2 ...
    =====================Flash Type(eMMC)==============
    Flash   Size: 0x00000003A3E00000 -> 14910M
    Flash     ID: 0x150100514531334D
    Flash   Name: Samsung_Unknow
    Flash symbol: QE13MB
>>> Swich Mobile to Hight Speed Re\Wr Port...
    Get Mobile Port is:  COM22
>>> Device driver identification: 
    MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Success
>>>>Formating Mobile USER Data...
    ADD(HEX):0x00EA800000    Size(HEX):0x02B85FBE00
    Corresponding operation completed!!!
    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!


5 Nhận xét

  1. Disconnect Mobile...
    Re-Put the Mobile Bettery...
    Then Connect your Phone to Computer again....
    Please Make sure Mobile better has Power...
    >>> Searching Mobile Port...
    Get Mobile Port is: COM3
    >>> Device driver identification:
    MediaTek USB Port
    >>> Mobile Has Connect...
    CPU_NAME: MT6755
    >>> Reading Mobile Hardware Info...Success
    HW_Inf: 8A00 SW_Inf: CB00
    >>> Initialization Mobile ...
    >>> Sending Auth File To Mobile...Success
    >>>>Trying Connect to Service verification data...
    Success
    >>> Downloading Boot1 To Mobile Phone...Success
    Mobile phone status:SYNC...
    Mobile phone status swtich to :brom...Success
    Success
    Make sure Mobile status has in :brom...
    Init Mobile BOOT2 ...
    =====================Flash Type(eMMC)==============
    Flash Size: 0x00000003AB800000 -> 15032M
    Flash ID: 0x90014A4841473265
    Flash Name: Hynix_Unknow
    Flash symbol: HAG2e
    >>> Swich Mobile to Hight Speed Re\Wr Port...
    Get Mobile Port is: COM5
    >>> Device driver identification:
    MediaTek DA USB VCOM (Android)
    >>> Reading Mobile Map Data...Success
    >>>>Geting Mobile info data...
    ADD(HEX):0x0023BC8000 Size(HEX):0x0000700000
    >>>>Writeing Mobile info data...
    This Phone Support CDMA
    SN has Change to :91QEBP94Z66E
    SN has Change to :91QEBP94Z66E
    >>>>Formating Mobile USER Data...
    ADD(HEX):0x00EB000000 Size(HEX):0x02BF7FBE00
    Corresponding operation completed!!!
    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

    Trả lờiXóa
  2. Disconnect Mobile...
    Re-Put the Mobile Bettery...
    Then Connect your Phone to Computer again....
    Please Make sure Mobile better has Power...
    >>> Searching Mobile Port...
    Get Mobile Port is: COM6
    >>> Device driver identification:
    MediaTek USB Port
    >>> Mobile Has Connect...
    CPU_NAME: MT6755
    >>> Reading Mobile Hardware Info...Success
    HW_Inf: 8A00 SW_Inf: CB00
    >>> Initialization Mobile ...
    >>> Sending Auth File To Mobile...Success
    >>>>Trying Connect to Service verification data...
    Success
    >>> Downloading Boot1 To Mobile Phone...Success
    Mobile phone status:SYNC...
    Mobile phone status swtich to :brom...Success
    Success
    Make sure Mobile status has in :brom...
    Init Mobile BOOT2 ...
    =====================Flash Type(eMMC)==============
    Flash Size: 0x00000003A3E00000 -> 14910M
    Flash ID: 0x150100513832334D
    Flash Name: Samsung_Unknow
    Flash symbol: Q823MB
    >>> Swich Mobile to Hight Speed Re\Wr Port...
    Get Mobile Port is: COM8
    >>> Device driver identification:
    MediaTek DA USB VCOM (Android)
    >>> Reading Mobile Map Data...Success
    >>>>Geting Mobile info data...
    ADD(HEX):0x0029800000 Size(HEX):0x0000300000
    >>>>Writeing Mobile info data...
    This Phone Support CDMA
    SN has Change to :Y150ZZ316K06
    This Phone Support CDMA
    SN has Change to :0600ED SN has Change to :0600ED >>>>Formating Mobile USER Data...
    ADD(HEX):0x00EA800000 Size(HEX):0x02B85FBE00
    Corresponding operation completed!!!
    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

    Trả lờiXóa
  3. Disconnect Mobile...
    Re-Put the Mobile Bettery...
    Then Connect your Phone to Computer again....
    Please Make sure Mobile better has Power...
    >>> Searching Mobile Port...
    Get Mobile Port is: COM3
    >>> Device driver identification:
    MediaTek USB Port_V1632
    >>> Mobile Has Connect...
    CPU_NAME: MT6755
    >>> Reading Mobile Hardware Info...Success
    HW_Inf: 8A00 SW_Inf: CB00
    >>> Initialization Mobile ...
    >>> Sending Auth File To Mobile...Success
    >>>>Trying Connect to Service verification data...
    Success
    >>> Downloading Boot1 To Mobile Phone...Success
    Mobile phone status:SYNC...
    Mobile phone status swtich to :brom...Success
    Success
    Make sure Mobile status has in :brom...
    Init Mobile BOOT2 ...
    =====================Flash Type(eMMC)==============
    Flash Size: 0x00000003A3E00000 -> 14910M
    Flash ID: 0x150100513832334D
    Flash Name: Samsung_Unknow
    Flash symbol: Q823MB
    >>> Swich Mobile to Hight Speed Re\Wr Port...
    Get Mobile Port is: COM28
    >>> Reading Mobile Map Data...Success
    >>>>Geting Mobile info data...
    ADD(HEX):0x0029800000 Size(HEX):0x0000300000
    >>>>Writeing Mobile info data...
    This Phone Support CDMA
    SN has Change to :Y150ZZ316F12
    This Phone Support CDMA
    SN has Change to :124713 SN has Change to :124713 >>>>Formating Mobile USER Data...
    ADD(HEX):0x00EA800000 Size(HEX):0x02B85FBE00
    Corresponding operation completed!!!
    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

    Trả lờiXóa
  4. Disconnect Mobile...
    Re-Put the Mobile Bettery...
    Then Connect your Phone to Computer again....
    Please Make sure Mobile better has Power...
    >>> Searching Mobile Port...
    Get Mobile Port is: COM129
    >>> Device driver identification:
    MediaTek USB Port_V1632
    >>> Mobile Has Connect...
    CPU_NAME: MT6755
    >>> Reading Mobile Hardware Info...Success
    HW_Inf: 8A00 SW_Inf: CB00
    >>> Initialization Mobile ...
    >>> Sending Auth File To Mobile...Success
    >>>>Trying Connect to Service verification data...
    Success
    >>> Downloading Boot1 To Mobile Phone...Success
    Mobile phone status:SYNC...
    Mobile phone status swtich to :brom...Success
    Success
    Make sure Mobile status has in :brom...
    Init Mobile BOOT2 ...
    =====================Flash Type(eMMC)==============
    Flash Size: 0x0000000747C00000 -> 29820M
    Flash ID: 0x150100525831424D
    Flash Name: Samsung_Unknow
    Flash symbol: RX1BMB
    >>> Swich Mobile to Hight Speed Re\Wr Port...
    Get Mobile Port is: COM312
    >>> Reading Mobile Map Data...Success
    >>>>Geting Mobile info data...
    ADD(HEX):0x0023BC8000 Size(HEX):0x0000700000
    >>>>Writeing Mobile info data...
    This Phone Support CDMA
    SN has Change to :91QECP:58HHL
    SN has Change to :91QECP:58HHL
    >>>>Formating Mobile USER Data...
    ADD(HEX):0x00EB000000 Size(HEX):0x065BBFBE00
    Corresponding operation completed!!!
    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

    Trả lờiXóa
  5. Disconnect Mobile...
    Re-Put the Mobile Bettery...
    Then Connect your Phone to Computer again....
    Please Make sure Mobile better has Power...
    >>> Searching Mobile Port...
    Get Mobile Port is: COM129
    >>> Device driver identification:
    MediaTek USB Port_V1632
    >>> Mobile Has Connect...
    CPU_NAME: MT6755
    >>> Reading Mobile Hardware Info...Success
    HW_Inf: 8A00 SW_Inf: CB00
    >>> Initialization Mobile ...
    >>> Sending Auth File To Mobile...Success
    >>>>Trying Connect to Service verification data...
    Success
    >>> Downloading Boot1 To Mobile Phone...Success
    Mobile phone status:SYNC...
    Mobile phone status swtich to :brom...Success
    Success
    Make sure Mobile status has in :brom...
    Init Mobile BOOT2 ...
    =====================Flash Type(eMMC)==============
    Flash Size: 0x00000003A3E00000 -> 14910M
    Flash ID: 0x150100513832334D
    Flash Name: Samsung_Unknow
    Flash symbol: Q823MB
    >>> Swich Mobile to Hight Speed Re\Wr Port...
    Get Mobile Port is: COM312
    >>> Device driver identification:
    MediaTek DA USB VCOM (Android)
    >>> Reading Mobile Map Data...Success
    >>>>Geting Mobile info data...
    ADD(HEX):0x0029800000 Size(HEX):0x0000300000
    >>>>Writeing Mobile info data...
    This Phone Support CDMA
    SN has Change to :Y150ZZ316F13
    This Phone Support CDMA
    SN has Change to :139229 SN has Change to :139229 >>>>Formating Mobile USER Data...
    ADD(HEX):0x00EA800000 Size(HEX):0x02B85FBE00
    Corresponding operation completed!!!
    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

    Trả lờiXóa