Meizu M6 Note (M721M) Remove Password | Flyme ID | FRP

Meizu M6 Note (M721M) Remove Password | Meizu M6 Note (M721M) Remove Flyme ID

Meizu M6 Note (M721M) Xóa Flyme ID Thành Công
Meizu M6 Note (M721M) Remove Flyme Account By MRT
Meizu M6 Note (M721M) Remove Flyme Account Via Teamviewer

Nhận Xóa Mã Bảo Vệ - Flyme Account - FRP Meizu M6 Note (M721M)
-------------------✩✬✩--------------------
☯ Unlock - Remove FRP - Repair IMEI - Online (Teamviewer)
☎ Hotline : 0966833711 (Zalo + Facebook + WhatsApp)
۩۩ Website : www.thanhnamPDAviet.net
Mã:
@thanhnamPDAviet
 
>>>>Auto search Mobile port...
>>>Try connect to mobile...Success
 CPU_SN:  0x3C8D208D
 MSM_ID:  0x000460E1
 
>>>Try connect to mobile...Success
>>>init mobile...Success
>>>Downloading boot...Success
>>>Switch mobile to RE\WR ...Success
 Flasy type:  eMMC
>>>>read mobile GPT data...Success
 Clear Moblile Lock data...
 After Click Mobile userdata will be lost...
 Format add: ADD:0x0174000000   Size:0x05D3BFBE00
 Erase Userdata.. Success
 Erase Userdata Block 2...
 Erase Userdata.. Success
 Erase Userdata Block 3...
 Erase Userdata.. Success
 Erase Userdata Block 4...
 Erase Userdata.. Success
 Eraseing Block  Activation lock...
   ADD:0x0050000000   Size:0x0000700000
Success
>>>>rebooting mobile phones
 reboot mobile success
 After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!





10 Nhận xét

  1. >>>>Auto search Mobile port...
    >>>Try connect to mobile...Success
    CPU_SN: 0xE392EC25
    MSM_ID: 0x000460E1

    >>>Try connect to mobile...Success
    >>>init mobile...Success
    >>>Downloading boot...Success
    >>>Switch mobile to RE\WR ...Success
    Flasy type: eMMC
    >>>>read mobile GPT data...Success
    Clear Moblile Lock data...
    After Click Mobile userdata will be lost...
    Format add: ADD:0x0174000000 Size:0x05D3BFBE00
    Erase Userdata.. Success
    Erase Userdata Block 2...
    Erase Userdata.. Success
    Erase Userdata Block 3...
    Erase Userdata.. Success
    Erase Userdata Block 4...
    Erase Userdata.. Success
    >>>>rebooting mobile phones
    reboot mobile success
    >>>all is done
    ********************************
    Please disconnect mobile set,and hold vol up and power key
    Mobile will be into recovery
    Click Restart
    ********************************
    if mobile hand on logo or auto restart...
    You can in recovery erase data
    After ease data in recovery mobile will working normal
    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

    Trả lờiXóa
  2. Please install driver from QcFire\Drivers folder using Device Manager.
    Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
    Reading Partition Table...OK
    Reading Device Information...OK
    Device : Meizu M6 Note [msm8953]
    Software : Flyme 7.0.1.0G, m1721.Flyme_7.0.1531448833 [Thu Aug 9 16:33:29 CST 2018]
    Android Ver. : 7.1.2
    Patch Level : 2018-06-05
    Resetting FRP Lock......Done
    Operation Finished.

    Trả lờiXóa
  3. >>>>Auto search Mobile port...
    >>>Try connect to mobile...Success
    CPU_SN: 0xB4AAD8B9
    MSM_ID: 0x000460E1

    >>>Try connect to mobile...Success
    >>>init mobile...Success
    >>>Downloading boot...Success
    >>>Switch mobile to RE\WR ...Success
    Flasy type: eMMC
    >>>>read mobile GPT data...Success
    Clear Moblile Lock data...
    After Click Mobile userdata will be lost...
    Format add: ADD:0x0174000000 Size:0x05D3BFBE00
    Erase Userdata.. Success
    Erase Userdata Block 2...
    Erase Userdata.. Success
    Erase Userdata Block 3...
    Erase Userdata.. Success
    Erase Userdata Block 4...
    Erase Userdata.. Success
    >>>>rebooting mobile phones
    reboot mobile success
    >>>all is done
    ********************************
    Please disconnect mobile set,and hold vol up and power key
    Mobile will be into recovery
    Click Restart
    ********************************
    if mobile hand on logo or auto restart...
    You can in recovery erase data
    After ease data in recovery mobile will working normal
    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

    Trả lờiXóa
  4. Device : Meizu M6 Note [msm8953]
    Software : Flyme 7.0.1.0G, m1721.Flyme_7.0.1531448833 [Thu Aug 9 16:33:29 CST 2018]
    Android Ver. : 7.1.2
    Patch Level : 2018-06-05
    Preparing Data...Done
    Formatting Userdata...Done
    Resetting FRP Lock......Done

    Trả lờiXóa
  5. QC HW ID: 000460E120161721
    QC CPU: Snapdragon 625 MSM8953
    QC SW VER: 00000000
    Searching loader...
    Sending loaders...
    Loader send successfuly.
    Reconnecting...
    Checking request..
    Reading partition...
    Reading info...
    Brand: Meizu
    Model: M6 Note
    Device: M6Note
    Platform: msm8953
    Android version: 7.1.2
    Display ID: Flyme 7.1.0.0G
    Searching for signatures...
    Resetting FRP lock..
    FRP lock is successfully reseted!
    Rebooting phone

    Trả lờiXóa
  6. Operation : Format FS
    Checking for existing devices...Found
    Port : Qualcomm HS-USB QDLoader 9008 (COM5)
    Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
    Opening Port...OK
    Init Handshake Sequence...OK
    Hardware ID : E1600400 [8953] 21171620
    OPK_DATA : D0AA91A220EE255514E151360662EC176D633402E7032F91A865CF12D9075CF0
    Initializing Protocol...OK
    Using Auto Loader Selection [1]
    Preparing Loader...Done
    Sending Loader [8953_020]...Done
    Executing Loader...OK
    Detecting Chip Type...OK
    Hardware : 8953, eMMC, 32 GB
    LU Count : 1 [0x03A3E000]
    WARNING! High Speed Driver is not installed.
    Please install driver from QcFire\Drivers folder using Device Manager.
    Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
    Reading Partition Table...OK
    Reading Device Information...OK
    Device : Meizu M6 Note [msm8953] [M6Note]
    Software : Flyme 7.1.0.0G, m1721.Flyme_7.0.1539977208 [Wed Nov 28 16:59:47 CST 2018]
    Android Ver. : 7.1.2
    Patch Level : 2018-10-01
    Formatting userdata [SafeMode]...Done
    Resetting FRP Lock......Done
    Operation Finished.

    Trả lờiXóa
  7. >>>>Auto search Mobile port...
    >>>Try connect to mobile...Success
    CPU_SN: 0x3544D2F0
    MSM_ID: 0x000460E1

    >>>Try connect to mobile...Success
    >>>init mobile...Success
    >>>Downloading boot...Success
    >>>Switch mobile to RE\WR ...Success
    Flasy type: eMMC
    >>>>read mobile GPT data...Success
    Clear Moblile Lock data...
    After Click Mobile userdata will be lost...
    Format add: ADD:0x0174000000 Size:0x05D3BFBE00
    Erase Userdata.. Success
    Erase Userdata Block 2...
    Erase Userdata.. Success
    Erase Userdata Block 3...
    Erase Userdata.. Success
    Erase Userdata Block 4...
    Erase Userdata.. Success
    Eraseing Block Activation lock...
    ADD:0x0050000000 Size:0x0000700000
    Success
    >>>>rebooting mobile phones
    reboot mobile success
    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

    Trả lờiXóa
  8. >>>>Auto search Mobile port...
    >>>Try connect to mobile...Success
    CPU_SN: 0x71F055E3
    MSM_ID: 0x000460E1

    >>>Try connect to mobile...Success
    >>>init mobile...Success
    >>>Downloading boot...Success
    >>>Switch mobile to RE\WR ...Success
    Flasy type: eMMC
    >>>>read mobile GPT data...Success
    Clear Moblile Lock data...
    After Click Mobile userdata will be lost...
    Format add: ADD:0x0174000000 Size:0x05D3BFBE00
    Erase Userdata.. Success
    Erase Userdata Block 2...
    Erase Userdata.. Success
    Erase Userdata Block 3...
    Erase Userdata.. Success
    Erase Userdata Block 4...
    Erase Userdata.. Success
    Eraseing Block Activation lock...
    ADD:0x0050000000 Size:0x0000700000
    Success
    >>>>rebooting mobile phones
    reboot mobile success
    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

    Trả lờiXóa
  9. >>>>Auto search Mobile port...
    >>>Try connect to mobile...Success
    CPU_SN: 0x1A865C2F
    MSM_ID: 0x000460E1

    >>>Try connect to mobile...Success
    >>>init mobile...Success
    >>>Downloading boot...Success
    >>>Switch mobile to RE\WR ...Success
    Flasy type: eMMC
    >>>>read mobile GPT data...Success
    Clear Moblile Lock data...
    After Click Mobile userdata will be lost...
    Format add: ADD:0x0174000000 Size:0x05D3BFBE00
    Erase Userdata.. Success
    Erase Userdata Block 2...
    Erase Userdata.. Success
    Erase Userdata Block 3...
    Erase Userdata.. Success
    Erase Userdata Block 4...
    Erase Userdata.. Success
    >>>>rebooting mobile phones
    reboot mobile success
    >>>all is done
    ********************************
    Please disconnect mobile set,and hold vol up and power key
    Mobile will be into recovery
    Click Restart
    ********************************
    if mobile hand on logo or auto restart...
    You can in recovery erase data
    After ease data in recovery mobile will working normal
    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

    Trả lờiXóa
  10. WARNING! High Speed Driver is not installed.
    Please install driver from QcFire\Drivers folder using Device Manager.
    Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
    Reading Partition Table...OK
    Reading Device Information...OK
    Device : Meizu M6 Note [msm8953] [M6Note]
    Software : Flyme 7.1.1.0G, m1721.Flyme_7.0.1545529059 [Tue Feb 19 16:10:52 CST 2019]
    Android Ver. : 7.1.2
    Patch Level : 2018-12-01
    Resetting FRP Lock......Done

    Trả lờiXóa