Samsung S8 Plus SC-02J Không Hiện Ô Code | Mở Mạng Thành Công

Samsung S8 Plus SC-02J Không Hiện Ô Code | Mở Mạng Thành Công

Samsung S8 Plus SC-02J Khóa Sim Nhà Mạng,Nhưng Lắp Sim Thì Không Hiện Ô Code,Hoăc Hiện Ô Code mà Không Có bàn Phím Để Nhập

Nhận Unlock SC-02H Không Hiện Ô Code
Nhận Unlock SC-02J Không Hiện Ô Code
Nhận Unlock SC-03J Không Hiện Ô Code
Nhận Unlock SC-01K Không Hiện Ô Code
Nhận Unlock SC-02K Không Hiện Ô Code

☯ Unlock - Remove FRP - Repair IMEI - Online (Teamviewer)
☎ Hotline : 0966833711 (Zalo + Facebook)

Searching for SAMSUNG Mobile USB Modem...OK
SAMSUNG USB Modem detected on [COM22]
Looking for DEVICE...OK
Reading USB MODEM information...OK
MODEL  : SC-02J
VER  : SC02JOMU1BRH1/SC02JDCM1BRH1/SC02JOMU1BRH1/SC02JOMU1BRH1
IMEI : 356355085523288
S/N  : RF8K311NDC
U/N  : 988BDB465433504
Algorithm : MSM Crypto Engine v2.0
Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
Device Model : SC-02J
ADB Serial Number : 988BDB465433504830
AP Ver : SC02JOMU1BRH1
CP Ver : SC02JOMU1BRH1
CSC Ver : SC02JDCM1BRH1
Android Ver : 8.0.0
Debug Level : HIGH [0x4948]
CP Debug Level : OK [0x5500]
Writing applet to device...OK
Starting RIL applet...OK
Verifying IMEI via RIL...
IMEI : 356355085523288
Launching CP CRASH...[ALG:1]...OK
Waiting for UPLOAD MODE...[COM5]...OK
Preparing to read data...OK
Reading RAM data...[S1:OK]..[N2:OK]..[N3:OK]...OK
Rebooting device to NORMAL mode...OK
Searching HASH signature...[HSU:NA]...SKIP
Searching security HMAC...[CRT:NA]...OK
Calculating...[DMY:OK]...OK
Sending data to SERVER...OK
Waiting for SERVER response (may take few minutes)...OK
Sending unlock codes to phone...OK
Operation successful.

71938094




Samsung S8 Plus SC-02J Không Hiện Ô Code | Mở Mạng Thành Công Samsung S8 Plus SC-02J Không Hiện Ô Code | Mở Mạng Thành Công Reviewed by thanhnamPDAviet on tháng 10 14, 2018 Rating: 5

6 nhận xét:


  1. Waiting ADB device... OK
    Reading phone info...
    Model: SC-02J
    Android version: 7.0
    PDA version: FA70_SC02JOMU1AQF1
    CSC version:
    Phone version: SC02JOMU1AQDK
    Product code: SM-G950DZBA
    CSC country code:
    CSC sales code:
    Phone SN: RF8K32WST0H
    IMEI: 356355085885950
    HW version: REV0.4
    RF cal date: 2018.03.22
    Chip name: MSM8998
    Modem board: MSM8998
    Security patch: 2017-02-01
    Boot Warranty bit: 0
    SIM State: ABSENT
    Rebooting phone... OK
    Waiting ADB device... OK
    Rebooting phone... OK
    Waiting ADB device... OK
    Waiting for device to become ready... OK
    Initialization zTool... OK
    Running zTool, please wait...
    Start... OK
    Initialization... OK
    Generate and check client proof... OK
    Verify proof by client... OK
    Reading data from phone... OK
    Searching Ramdump interface... COM23 detected
    Reading data from phone... OK
    Calculating... OK
    Searching server... OK
    Waiting for server answer... OK
    Freeze code: 17027408
    NET lock: 93097462
    SUB lock: 00000000
    SP lock: 00000000
    CP lock: 00000000
    For check lock status: *#7465625#

    Trả lờiXóa
  2. Searching for SAMSUNG Mobile USB Modem...OK
    SAMSUNG USB Modem detected on [COM77]
    Looking for DEVICE...OK
    Reading USB MODEM information...OK
    MODEL : SC-02J
    VER : SC02JOMU1AQL1/SC02JDCM1AQL1/SC02JOMU1AQL1/SC02JOMU1AQL1
    IMEI : 356355085636742
    S/N : RF8K3171P6
    U/N : 988B9D3058474A5
    Loading ADB module..OK
    Starting ADB module...OK
    Searching for SAMSUNG ADB device...OK
    Checking device authorization...OK
    Reading ADB device information...
    Device Model : SC-02J
    ADB Serial Number : 988B9D3058474A5054
    AP Ver : SC02JOMU1AQL1
    CP Ver : SC02JOMU1AQL1
    CSC Ver : SC02JDCM1AQL1
    Android Ver : 7.0
    Debug Level : MID/LOW [0x4f4c]
    Setting DEBUG level to HIGH...OK
    Waiting for Reboot...OK
    CP Debug Level : N/A [0x55ff]
    Setting CP DEBUG mode..........OK
    Waiting for Reboot...OK
    Writing applet to device...OK
    Starting RIL applet...OK
    Verifying IMEI via RIL...
    IMEI : 356355085636742
    Launching CP CRASH...[ALG:1]...OK
    Waiting for UPLOAD MODE...[COM15]...OK
    Preparing to read data...[S1:OK]....OK
    Reading RAM data......[N2:OK]..[N3:OK]...OK
    Rebooting device to NORMAL mode...OK
    MSM JTAG ID : 0002005E
    MSM HW S/N : C5FC1A59
    MSM CONNIE : SC-02J_DCM_JPN_D402EB534CE5C0DF117BE357B5966C6A
    Sending data to SERVER...OK
    Waiting for SERVER response (may take few minutes)...OK
    Sending unlock codes to phone...OK
    Operation successful.

    Trả lờiXóa

  3. UNLOCK INSTRUCTIONS:
    Unlocking with original MSL code:
    Warning! Knox warranty must be active (0x00)!
    If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
    1. Phone must be powered on.
    2. Run dialer and type *#0*# (service mode will appear).
    3. Connect the phone to UART cable, choose correct COM port in port settings.
    4. Press 'Unlock' button.
    5. Paste MSL code in new opened window and press 'OK'.

    Reading codes using sever:
    1. Power on the phone.
    2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
    go to 'Settings'-'Developer options' and enable 'USB debugging'.
    3. Connect the phone to PC with USB cable, install drivers if needed.
    4. Select device in ADB settings.
    5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
    (Login and password will be saved as default after first input and can be changed in settings.)

    To reset Google account activation lock:
    1. ADB must be activated in any way (you can flash sBoot from combination firmware,
    make sure, that you are not upgrade sBoot).
    2. Connect the phone to PC with USB cable, install drivers if needed.
    3. Select device in ADB settings.
    4. Press 'Reset FRP' and follow the instructions in program.
    5. When process done, press 'Back' on phone and perform factory reset from phone settings.

    Operation: Read Codes via Server
    Selected model: SC-02J
    Selected port: COM174 SAMSUNG Mobile USB Serial Port
    Software version: 34.3

    Checking Login and Password... OK
    Ballance: 45 crd.
    You have 45 credit(s) left. This operation takes 5 credits.Continue? Yes
    Waiting ADB device... OK
    Reading phone info...
    Model: SC-02J
    Android version: 8.0.0
    PDA version: SC02JOMU1BRH1
    CSC version: SC02JDCM1BRH1
    Phone version: SC02JOMU1AQDK
    Product code: SM-G950DZKADCM
    CSC country code: JP
    CSC sales code: DCM
    Phone SN: RF8K12A26DZ
    IMEI: 356355084667797
    HW version: REV0.4
    RF cal date: 2018.01.25
    Chip name: MSM8998
    Modem board: MSM8998
    Security patch: 2018-08-01
    Boot Warranty bit: 0
    SIM State: ABSENT
    Waiting for device to become ready... OK
    Initialization zTool... OK
    Running zTool, please wait...
    Start... OK
    Initialization... OK
    Generate and check client proof... OK
    Verify proof by client... OK
    Reading data from phone... OK
    Searching Ramdump interface... COM5 detected
    Reading data from phone... OK
    Calculating... OK
    Searching server... OK
    Waiting for server answer... OK
    Freeze code: 03840817
    NET lock: 06979274
    SUB lock: 00000000
    SP lock: 00000000
    CP lock: 00000000
    For check lock status: *#7465625#

    Trả lờiXóa
  4. Searching for SAMSUNG Mobile USB Modem...OK
    SAMSUNG USB Modem detected on [COM90]
    Looking for DEVICE...OK
    Reading USB MODEM information...OK
    MODEL : SC-02J
    VER : SC02JOMU1BRH1/SC02JDCM1BRH1/SC02JOMU1AQDK/SC02JOMU1BRH1
    IMEI : 356355083495851
    S/N : RF8JC0TWR9
    U/N : 988A9B34304C383
    Algorithm : MSM Crypto Engine
    Loading ADB module...OK
    Starting ADB module...OK
    Searching for SAMSUNG ADB device...OK
    Checking device authorization...OK
    Reading ADB device information...
    Device Model : SC-02J
    ADB Serial Number : 988A9B34304C383348
    AP Ver : SC02JOMU1BRH1
    CP Ver : SC02JOMU1AQDK
    CSC Ver : SC02JDCM1BRH1
    Android Ver : 8.0.0
    Debug Level : HIGH [0x4948]
    CP Debug Level : OK [0x5500]
    Writing applet to device...OK
    Starting RIL applet...OK
    Verifying IMEI via RIL...
    IMEI : 356355083495851
    Launching CP CRASH...[ALG:1]...OK
    Waiting for UPLOAD MODE...[COM45]...OK
    Preparing to read data...OK
    Reading RAM data...[S1:OK]..[N2:OK]..[N3:OK]...OK
    Rebooting device to NORMAL mode...OK
    Searching HASH signature...[HSU:NA]...SKIP
    Searching security HMAC...OK
    Calculating...[IDX:OK]...[HASH:OK]...[PLN:OK]...OK
    Sending data to SERVER...OK
    Waiting for SERVER response (may take few minutes)...OK
    Sending unlock codes to phone...OK
    Operation successful.

    27417091
    29074742

    Trả lờiXóa
  5. @thanhnamPDAviet
    Waiting ADB device... OK
    Reading phone info...
    Model: SC-02H
    Android version: 6.0.1
    PDA version: FA60_SC02HOMU1APG2
    CSC version:
    Phone version: SC02HOMU1CRH5
    Product code: SM-G935DZKADCM
    CSC country code:
    CSC sales code:
    Phone SN: RF8H803W19V
    IMEI: 356817073151653
    HW version: REV0.4
    RF cal date: 2016.08.01
    Chip name: MSM8996
    Modem board: MSM8996
    Security patch: 2016-01-01
    Boot Warranty bit: 1
    SIM State: NETWORK_LOCKED
    Waiting for device to become ready... OK
    Initialization zTool... OK
    Running zTool, please wait... OK
    Reading data from phone... OK
    Searching Ramdump interface... COM14 detected
    Reading data from phone... OK
    Calculating... OK
    Searching server... OK
    Waiting for server answer... OK
    Freeze code: 17505296
    NET lock: 41538585
    SUB lock: 00000000
    SP lock: 00000000
    CP lock: 00000000
    For check lock status: *#7465625#

    Trả lờiXóa
  6. Waiting ADB device... OK
    Reading phone info...
    Model: SC-02H
    Android version: 6.0.1
    PDA version: SC02HOMU1APD6
    CSC version: SC02HDCM1APD6
    Phone version: SC02HOMU1CRH5
    Product code: SM-G935DZKADCM
    CSC country code: JP
    CSC sales code: DCM
    Phone SN: RF8H625Q3XD
    IMEI: 356817071949454
    HW version: REV0.4
    RF cal date: 2016.06.22
    Chip name: MSM8996
    Modem board: MSM8996
    Security patch: 2016-04-02
    Boot Warranty bit: 1
    SIM State: NETWORK_LOCKED
    Initialization zTool... OK
    Running zTool, please wait... OK
    Reading data from phone... OK
    Searching Ramdump interface... COM47 detected
    Reading data from phone... OK
    Calculating... OK
    Searching server... OK
    Waiting for server answer... OK
    Freeze code: 82057241
    NET lock: 03797084
    SUB lock: 00000000
    SP lock: 00000000
    CP lock: 00000000
    For check lock status: *#7465625#

    Trả lờiXóa

Được tạo bởi Blogger.