Samsung S6 Edge Au SCV31 Unlock | Samsung S6 Edge Au SCV31 Mở Mạng

Samsung S6 Edge Au SCV31 Unlock | Samsung S6 Edge Au SCV31 Mở Mạng

Samsung S6 Edge Au SCV31 Khóa Sim Nhà Mạng | Mở Mạng Thành Công
Samsung S6 Edge Au SCV31 Network Lock | Unlock Network Online
Samsung S6 Edge Au SCV31 Unlock Network By Z3X Pro | BST
Samsung S6 Edge Au SCV31 Mở mạng | Hỗ Trợ Mở Mạng Online
Samsung S6 Edge Au SCV31 Nạp Tiếng Việt | Repair IMEI | DRK

☯ Unlock - Remove FRP - Repair IMEI - Online (Teamviewer)
☎ Hotline : 0966833711 (Zalo + Facebook)

@thanhnamPDAviet

Waiting ADB device... OK
Reading phone info...
Model: QUF
Android version: 5.0.2
PDA version: FA50_SCV31KDU1AOE1
CSC version: 
Phone version: SCV31KDU1AOD4
Product code: SM-G925JZKAKDI
CSC country code: 
CSC sales code: 
Phone SN: R38G4069N2Y
IMEI: 
HW version: G925J.04
RF cal date: 2015.04.08
Chip name: EXYNOS7420
Modem board: MDM9635M
Boot Warranty bit: 1
Incorrect model selected. This may damage your phone. Continue?  Yes
Writing AT RIL... OK
Initialization AT RIL... OK
Bypass MSL OK
Repairing IMEI... OK
Rebooting phone... OK
Repair done



Samsung S6 Edge Au SCV31 Unlock | Samsung S6 Edge Au SCV31 Mở Mạng Samsung S6 Edge Au SCV31 Unlock | Samsung S6 Edge Au SCV31 Mở Mạng Reviewed by thanhnamPDAviet on tháng 9 06, 2018 Rating: 5

2 nhận xét:


  1. REPAIR INSTRUCTIONS:
    Activate Diagnostic Port:
    1. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
    go to 'Settings'-'Developer options' and enable 'USB debugging'.
    2. Select device in ADB settings.
    3. Press 'Activate Diag' button.

    Repair IMEI/Serial/BT/WiFi/Product Code:
    1. Power on the phone.
    2. Type *#0808# and select 'DM+MODEM+ADB'.
    3. Reboot phone.
    4. Connect USB cable, install drivers if needed.
    5. Select Samsung diagnostic port in port settings.
    6. Press 'Reset MSL' button to deactivate security.
    7. Wait till phone reboot.
    8. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
    go to 'Settings'-'Developer options' and enable 'USB debugging'.
    9. Select device in ADB settings.
    10. Fill values what you need to repair.
    11. Press 'Repair' button.

    Reset EFS, Disable Factory Mode:
    Phone must be rooted!
    If the software can't root the phone automatically,
    then you must root your device manually.
    1. Power on the phone.
    2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
    go to 'Settings'-'Developer options' and enable 'USB debugging'.
    3. Connect the phone to PC with USB cable, install drivers if needed.
    4. Select device in ADB settings.
    5. Press 'Reset EFS' if you need to reset it.
    Be carefully, do not perform this without necessity. Backup will be created automatically.
    6. If you have yellow table on your device screen, then press 'Disable Factory Mode' button.

    Wipe EFS/NVM:
    If you have 'IMEI null/null' or 'Phone baseband unknown' errors,
    Then you can try to repair this errors with this function.
    Phone must be rooted!
    If the software can't root the phone automatically,
    then you must root your device manually.
    1. Power on the phone.
    2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
    go to 'Settings'-'Developer options' and enable 'USB debugging'.
    3. To use 'Auto backup/restore QCN' function (recommended):
    Type *#0808# and select 'DM+MODEM+ADB'.
    Type *#9090# and select 'DM/DUN over HSIC'.
    Or use 'Activate Diag' function.
    Or you can disable this function and use ADB only.
    4. Connect the phone to PC with USB cable, install drivers if needed.
    5. Select diagnostic port in port settings if 'Auto backup/restore QCN' is not skipped.
    6. Select device in ADB settings.
    7. Press 'Wipe EFS/NVM' button.

    Operation: Repair
    Selected model: SCL21
    Selected port: COM30 SAMSUNG Mobile USB Serial Port
    Software version: 34.1

    Waiting ADB device... OK
    Reading phone info...
    Model: QUF
    Android version: 5.0.2
    PDA version: FA50_SCV31KDU1AOE1
    CSC version:
    Phone version: SCV31KDU1AOD4
    Product code: SM-G925JZKAKDI
    CSC country code:
    CSC sales code:
    Phone SN: R38G4094BBW
    IMEI:
    HW version: G925J.04
    RF cal date: 2015.04.10
    Chip name: EXYNOS7420
    Modem board: MDM9635M
    Boot Warranty bit: 0
    Incorrect model selected. This may damage your phone. Continue? Yes
    Writing AT RIL... OK
    Initialization AT RIL... OK
    Bypass MSL OK
    Repairing IMEI... OK
    Rebooting phone... OK
    Repair done

    Done with Samsung Tool PRO v.34.1

    Trả lờiXóa
  2. Waiting ADB device... OK
    Reading phone info...
    Model: QUF
    Android version: 5.0.2
    PDA version: FA50_SCV31KDU1AOE1
    CSC version:
    Phone version: SCV31KDU1AOD4
    Product code: SM-G925JZWAKDI
    CSC country code:
    CSC sales code:
    Phone SN: R38G505RTNK
    IMEI:
    HW version: G925J.04
    RF cal date: 2015.05.07
    Chip name: EXYNOS7420
    Modem board: MDM9635M
    Boot Warranty bit: 0
    Incorrect model selected. This may damage your phone. Continue? Yes
    Writing AT RIL... OK
    Initialization AT RIL... OK
    Bypass MSL OK
    Repairing IMEI... OK
    Rebooting phone... OK
    Repair done

    Trả lờiXóa

Được tạo bởi Blogger.